Optimization parameters for an environmental sustainability model of the Ecuadorian manufacturing industry.
DOI:
https://doi.org/10.29076/issn.2528-7737vol17iss46.2024pp%25ppAbstract
Industrial activities generate negative environmental impacts as a consequence of their production processes. Besides, global demands for the care of the planet drive to generate more sustainable production systems. For this reason, the objective of this research is to define and analyze the parameters involved in the optimization of sustainability strategies in the manufacturing industry of Ecuador towards sustainable production in the environmental, economic and social spheres. For the development of the research, we started from the environmental objectives shown in the database of the survey of companies conducted by INEC in Ecuador; subsequently, a study of the existing literature on optimization models was carried out to define modeling parameters that are adapted to the industrial sector studied. Finally, the parameters obtained from the literature and the database were characterized through the Criteria Importance Through Intercriteria Correlation (CRITIC) model. The most relevant were: unit cost of water treatment, transportation cost, carbon.
Downloads
References
Alcocer Quinteros, P., Knudsen González, J., Marrero Delgado, F., & Miranda Casanova, B. (2020). Modelo multicriterio para la gestión integral de residuos sólidos urbanos en Quevedo – Ecuador. Revista de Ciencias Sociales. https://orcid.org/0000-0002-5470-2572
Aldás, D., Mula, J., & Diaz-Madroñero, M. (2024). Dimensions and Challenges to Integrate Operations Strategies into a Sustainable and Circular Supply Chain (pp. 403–408). https://doi.org/10.1007/978-3-031-57996-7_69
Alzate, A., Ramírez, J., & Alzate, S. (2018). 74 REVISTA CHILENA DE ECONOMÍA Y SOCIEDAD, JUNIO 2018 MODELO DE GESTIÓN AMBIENTAL ISO 14001: EVOLUCIÓN Y APORTE A LA SOSTENIBILIDAD ORGANIZACIONAL.
Aznar Bellver, J., & García García, F. (2011). Una alternativa multicriterio a la valoración de empresas: aplicación a las Cajas de Ahorro A Multicriteria Alternative to Companies’ Valuation: Application to a Spanish Savings Bank. www.revista-eea.net,
Beheshtinia, M. A., & Fathi, M. (2023). Energy-efficient and sustainable supply chain in the manufacturing industry. Energy Science and Engineering, 11(1), 357–382. https://doi.org/10.1002/ese3.1337
Brundtland. (1987). Desarrollo y cooperación económica internacional: medio ambiente. https://www.ecominga.uqam.ca/PDF/BIBLIOGRAPHIE/GUIDE_LECTURE_1/CMMA-Informe-Comisión-Brundtland-sobre-Medio-Ambiente- Desarrollo.pdf
Cornejo-Cañamares, M., Medrano, N., & Olarte-Pascual, C. (2021). Environmental objectives and non-technological innovation in Spanish manufacturing SMEs. Journal of Cleaner Production, 296. https://doi.org/10.1016/j.jclepro.2021.126445
Dehaghi, B. F., & Khoshfetrat, A. (2020). AHP-GP approach by considering the leopold matrix for sustainable water reuse allocation: Najafabad case study, Iran. Periodica Polytechnica Civil Engineering, 64(2), 485–499. https://doi.org/10.3311/PPci.14689
Feitó Cespón, M., Castro, R. C., & Rubio Rodríguez, M. A. (2016). Modelos de optimización para el diseño sostenible de cadenas de suministros de reciclaje de múltiples productos Optimization model to sustainable design of multiple-products recycling supply chain. In Revista chilena de ingeniería (Vol. 24, Issue 1).
Gil Rodríguez, A., Pell del Rio, S., & Valdés, D. (2020). Guía metodológica para la gestión ambiental: una propuesta cubana. Revista Cubana de Educación Superior. http://scielo.sld.cu/pdf/rces/v39n2/0257-4314-rces-39-02-e13.pdf
Groover, M. (2007). Fundamentos de Manufactura Moderna (McGraw-Hil).
Hernández, A., González, G., & González, H. (2016). Desarrollo sustentable: de la teoría a la práctica (Ediciones).
Ibn Batouta, K., Aouhassi, S., & Mansouri, K. (2023). Energy efficiency in the manufacturing industry — A tertiary review and a conceptual knowledge-based framework. Energy Reports, 9, 4635–4653. https://doi.org/10.1016/j.egyr.2023.03.107
Jabarzadeh, Y., Reyhani Yamchi, H., Kumar, V., & Ghaffarinasab, N. (2020). A multi-objective mixed-integer linear model for sustainable fruit closed-loop supply chain network. Management of Environmental Quality: An International Journal, 31(5), 1351–1373. https://doi.org/10.1108/MEQ-12-2019-0276
Leff, E. (2006). Ética por la Vida. Elogio de la voluntad de poder. Polis : Revista de La Universidad Bolivariana, 5(13), 0.
Madroñero Palacios, S., & Guzmán Hernández, T. (2018). Desarrollo sostenible.
Aplicabilidad y sus tendencias. Revista Tecnología En Marcha, 31(3). https://doi.org/10.18845/tm.v31i3.3907
Muñoz, B., & Romana, M. G. (2016). Application of Multicriteria Decision Methods in Evaluating Alternative Solutions for Transportation Facilities.
Mahjoub, N., & Sahebi, H. (2020). The water-energy nexus at the hybrid bioenergy supply chain: A sustainable network design model. Ecological Indicators, 119. https://doi.org/10.1016/j.ecolind.2020.106799
Okorie, O., Charnley, F., Russell, J., Tiwari, A., & Moreno, M. (2021). Circular business models in high value manufacturing: Five industry cases to bridge theory and practice. Business Strategy and the Environment. https://doi.org/10.1002/bse.2715
Oliveira, C., Baptista, J., & Cerveira, A. (2023). Self-Sustainability Assessment for a High Building Based on Linear Programming and Computational Fluid Dynamics. Algorithms, 16(2). https://doi.org/10.3390/a16020107
ONU. (2018). La Agenda 2030 y los Objetivos de Desarrollo Sostenible: una oportunidad para América Latina y el Caribe. www.issuu.com/publicacionescepal/stacks
Páez, J. C. (2011). Elementos de la Gestión Ambiental (AMECUADOR).
Rajak, S., Vimal, K. E. K., Arumugam, S., Parthiban, J., Sivaraman, S. K., Kandasamy, J., & Duque, A. A. (2022). Multi-objective mixed-integer linear optimization model for sustainable closed-loop supply chain network: a case study on remanufacturing steering column. Environment, Development and Sustainability, 24(5), 6481–6507. https://doi.org/10.1007/s10668-021-01713-5
Ríos-Almodóvar, J. G., & Carrillo-Regalado, S. (2014). El empleo calificado y no calificado en la manufactura de México ante la crisis de 2009. Economía Sociedad y Territorio, 2014. https://doi.org/10.22136/est002014393
Sánchez Juárez, I. L., & Moreno Brid, J. C. (2016). El reto del crecimiento en México: industrias manufactureras y política industrial. Revista Finanzas y Política Económica, 8(2), 271–299. https://doi.org/10.14718/revfinanzpolitecon.2016.8.2.4
Vidal, A., & Asuaga, C. (2021). Gestión ambiental en las organizaciones: una revisión de la literatura. Revista Del Instituto Internacional de Costos, 18, 84– 122.
Vidal, E., & Regaldo, L. (2022). Gestión ambiental. Introducción a sus instrumentos y fundamentos. www.unl.edu.ar/editorial
Downloads
Published
Issue
Section
License
Copyright (c) 2025 CIENCIA UNEMI
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors can keep the copyright, granting the journal right of first publication. Alternatively, authors can transfer copyright to the journal, which allow authors non-commercial use of the work, including the right to place it in a file open access.
